[Array]
Content -> Hardware -> mergCBUS
* CAN-GC Overview
* CAN-GC1 | CAN-GC1e | CAN-GC2 | CAN-GC3 | CAN-GC4 | CAN-GC5 | CAN-GC6 | CAN-GC7 | CAN-GC8
* Firmware
Packet
The OPC_ACDAT opcode is used to send text blocks to the CAN-GC8.
The text must be terminated with a zero character.
A new line can be set with the pipe character: '|'. See Text format.
↧